Automatic quick change

With its C40 Automation, SMW-electronics offers an inductive coupling system for change applications. The wireless transmission of energy and signals allows moving components such as grippers or change pallets to be integrated into a digital factory via the PLC.

The inductive coupling systems from SMW-electronics have become a new benchmark in clamping and gripping technology. They transmit energy and signals via an air gap and therefore without annoying cables. In this way, the coupling systems can connect moving components with stationary components and exchange sensor signals between the application and the control level of an automation system.

Ideal for gripper changes, change pallets and format changes

The C40 Automation is a cubic coupling system with compact dimensions of 40 x 45 x 22 mm. It is ideal for change applications. This includes gripper changes in end-of-arm tooling (EOAT), the exchange of change pallets and format changes in workpiece processing.

The system consists of two elements. The base element is connected to the stationary component, for example on the robot side. The gripper, i.e. the moving component, is equipped with the remote element. When the robot sits on the gripper, both parts are coupled within a few seconds using dynamic pairing. The gripper is supplied with 15 W of energy, for example to operate a sensor system contained in it. At the same time, signals are transmitted between the gripping unit and the control level. Properties such as the ability to assign individual device names and a switchable signal direction expand the application possibilities.

C40 is easy to retrofit

The near-field transmission is contactless at a distance of 0 mm to 3 mm. Functions such as temperature monitoring, foreign object detection and reverse polarity protection ensure operation. The system is therefore low-wear and low-maintenance. It is protected according to IP67 and can be used in demanding environmental conditions and is insensitive to vibrations. The C40 Automation is available for signal transmission via IO-Link and PNP/analog signals. A mounting kit allows for easy retrofitting.