For almost every requirement

A motion controller with even more options: With the new MC 3602 B and MC 3606 B motion controllers from Faulhaber, selecting and commissioning drive systems is now even easier. With the compact MC 3602/06 B, DC motors, brushless DC motors and linear motors with the usual position sensors can be operated as servo drives in accordance with CiA 402. Also new is the support of stepper motors with encoders as servos or without encoders in open-loop operation. The products "speak" EtherCAT, CANopen, RS232 and USB.

The new MC 3602 B variant with up to 2 A continuous output current for smaller motors and the MC 3606 B variant with up to 6 A continuous output current for medium-sized motors make engineers' work easier. For applications in which more than one motor technology is used, only one motor controller and one GUI are required. The free Faulhaber software "Motion Manager 7" is available for installation and commissioning. This allows the drive to run in just a few steps.

All of the main operating modes of the CiA 402 Servodrive are offered. Integration takes place via CANopen or RS232, and the USB interface is mainly used for commissioning. An additional optional EtherCAT module allows cycle times of less than 1ms. In addition, the motion controllers can also be operated stand-alone without a central controller.

Everything from a single source

In combination with Faulhaber motors, the MC 3602 B and MC 3606 B provide a sophisticated drive system with extensive protective functions. The products were designed for the operation of motors with ironless windings and offer high dynamics. Standard motors - such as NEMA stepper motors - can also be operated with the MC 3602/06 B without any problems. This means they provide a solid basis for a wide range of applications.

Whether the application requires a stepper motor in open-loop or closed-loop operation, or in combination with brushless, linear or DC servo motors, the MC 3602/06 B provides a solution for almost every requirement - in industrial automation or laboratory automation, robotics, semiconductor processing or when used in measurement systems.