Precise drive control with absolute encoder

The powerful servo drive modules DC 064 and DC 104 with universal encoders reinforce the motion line of the S-DIAS series from Sigmatek.

Positioning tasks can be carried out very precisely and quickly. With 10 A continuous or 20 A peak current at 48 V, the double module variant DC 104 achieves an output of up to 480 W - and that in just 25 mm width and without an additional fan module. The single-disk module DC 064 is ideal for applications with up to 6 A continuous and 12 A peak current at 48 V DC.

A universal encoder interface is available for precise position feedback, which also enables the connection of absolute encoders (SSI, EnDAT2.2, BiSS-C P2P, Sanyo Denki, Tamagawa, incremental encoders with/without Hall encoders). The integrated motor temperature sensor input ensures that the maximum threshold is not exceeded - otherwise the power amplifier is switched off.

A +24 V DC output allows easy control of a holding brake. It is also possible to connect an external braking resistor, which ensures additional flexibility. The two-channel enable input interface (+24 V/3.2 mA/0.5 ms) can be used to activate the Safe Torque Off (STO) safety function, which meets SIL 3, Cat. 4, PL e according to EN 13849-1/2.

Dimensions:

• DC 064: 12.5 x 104 x 72 mm
• DC 104: 25 x 104 x 72 mm