At the all about automation trade fair in Düsseldorf, IEF-Werner will be presenting the domiLINE manual adjustment unit combined with rotary adjusters at stand 125. IEF-Werner offers this unit with NC control and manual operation.
In production environments with small or changing batch sizes, complete automation can be uneconomical. Manual or semi-automated solutions offer a better cost-benefit ratio in such cases. A typical example: In a palletizing system, a camera is used to detect the exact position of the component. If there is a product change, the image sensor must be readjusted. IEF-Werner is showcasing its manual adjustment unit domiLINE in Düsseldorf. A steel spindle moves the guide system. Positioning is carried out using a rotary knob or a hand wheel. Slide widths of 30, 50, 80, and 120 millimeters are available. These can be connected to the manual MDV rotary units. The play of the worm gearing is adjustable and has already been reduced to a minimum at the factory. This increases the repeat accuracy during positioning. New: The largest NC rotary table, the DT 160/200, is now also available as a manual version. It has a width of 160, a height of 200, and a depth of 90 millimeters, and weighs 9.8 kilograms. Its size and load capacity make it particularly attractive for large and heavy components.
Another exhibit in Düsseldorf shows a robot that will be mounted on a linear unit – keyword: “robot with 7th axis.” In assembly and material handling, this axis can significantly increase the efficiency of the robot. This is because it moves from one production station to another with a much greater range, which can be extended if necessary.
The special feature is that the axis and robot can be moved via a common control system, which means that the servo motor-driven axis does not require its own separate control unit. This not only saves space for a separate control cabinet, but also reduces expensive programming costs. Thanks to modern single-cable technology, a single cable is all that is needed from the control cabinet to the motor of the 7th axis. The daisy chain method also allows additional drives, such as rotary tables, to be integrated seamlessly and space-savingly into the system. These additional drives are conveniently controlled via a UR Cap for Polyscope, ensuring simple and consistent operation. An economical complete solution that is modular and quick to set up.
The flexible aiPRESS servo press series is a proven solution that has been used successfully by numerous companies for many years. It is available in four sizes – 3, 15, 36, and 100 kN – and can be integrated into both automated production lines and manual workstations. This allows workpieces to be joined or pressed with a high precision of just a few micrometers. Force-displacement monitoring via the intuitive aiQ-Control press control system means that continuous quality control is already built into the aiPRESS. Assemblies can thus be classified not only into good and bad parts, but even into different quality levels. The series has several standardized software and I/O interfaces for connection to the customer's system landscape. The press can be further adapted using various special functions.
Images: IEF-Werner GmbH
ief-werner.de
