Adjustment unit

Handcrafted precision

Handcrafted precision

Handcrafted precision

Handcrafted precision

With the domiLine adjustment unit, IEF-Werner GmbH has a proven adjustment slide in its product range, which can be used, for example, to manually move measuring systems to any possible position. The unit has a modular design and is easy to convert. If a rotary movement is also required, IEF-Werner also supplies the MDV manual rotary adjustment units.

There are tasks that can be solved very efficiently manually. A typical case: In a palletising system, a camera is to record the exact position of the component. If there is a product change, the image sensor has to be readjusted by the operator. For these and similar tasks, IEF-Werner has had the proven domiLine series in its range for years. In this manual adjustment unit, a precise steel spindle, mounted on ball bearings in an end plate and with a low-backlash, pre-tensioned plastic nut, moves the guide system. The exact positioning is done with a rotary knob or a handwheel. The rotary knob is ribbed and - just like the handwheel - has a scale. The unit can be mounted flexibly in all positions.

The domiLine adjustment unit has a modular design and can be easily converted. With slide widths of 30, 50, 80 and 120 millimetres, the user is very flexible. For the smallest version, for example, four different strokes of five to 20 millimetres each are available from stock, for the largest from 25 to 100 millimetres. Other strokes can also be realised according to customer requirements. The spindle pitches for the individual sizes are between 0.5 and two millimetres. Measuring systems, such as the camera mentioned at the beginning, can thus be set in any possible position.

The user can position each slide exactly by hand and fix it from the side with a clamping lever. The slide can also be clamped directly to the spindle. For this purpose, the mounting is slotted and can be tightened with a clamping lever, for example - and so tightly that the spindle can no longer move. In addition, the adjustment slides can be easily combined with special fixing elements without having to screw the individual elements together. Any axis configuration is conceivable - for example X-Y, X-Z, X-Y-Z or even X-Y-Y. IEF-Werner offers special X-Z or X-Y connection sets as accessories.

Not only can slides be connected to each other, but also to manual turning units. For this purpose, IEF-Werner has the MDV series in its range, which is available in four sizes. The smallest version has a diameter of 55 millimetres, the largest a rectangular cross-section of 100 x 140 millimetres. The backlash of the worm gearing is adjustable and already optimally reduced to a minimum at the factory. For the user, this means even higher positioning repeatability.

In addition, the spindle of the MDV 80/100 and MDV 100/140 is counter-bearing mounted. This allows the unit to absorb relatively high torques and loads. As with the domiLine, the exact positioning is done optionally with a rotary knob or a handwheel. The spindle can also be fixed in any position via a retrofittable clamping mechanism.

Both the adjustment unit and the turning unit are available with a mechanical or electronic position indicator on request. If required, IEF-Werner can also equip the system with a bus interface. This allows the units to transmit their own position, thus simplifying work when positions change frequently. The flexible shafts are also a useful accessory. These transmit the movements of the manual adjuster around every corner, at a distance of up to 1.5 metres.

Further Infos